CH EN
Position: Home > News > Industry news

  Through the understanding of the classification of new coatings under UV curing technology, and the application of a series of polyurethane coatings, UV curing process has proven to be a particularly efficient and environmentally friendly technology. The reason is not difficult to understand: the coating can be completely cured in less than 1 second, thereby ensuring that parts can be further processed almost instantly. Compared to the thermal curing process, this technology significantly reduces energy consumption and contributes to climate protection. It is precisely because of the characteristics of fast curing and a variety of excellent properties that UV curing is applied to the new process.

  At present, UV curing technology is being used in home decoration, and it is developing towards the concept of environmental protection, energy saving and health. In this new process solution, we will briefly explain, such as the process of parquet flooring, as UV curing coating Surfaces that meet the basic requirements of flooring materials have excellent abrasion and chemical resistance. And very easy to operate. For refurbishment projects, most of the currently adopted solutions are to use this process coating, which can reduce the solvent content to a minimum, or even contain no solvents at all. Using this process, the amount of solvent can be reduced by 100 to 150 grams per square meter, and the energy cost of industrial production can be reduced by about 0.40 euros per square meter. It broke the previous record of having to wait 1 to 3 days before using the floor, and immediately walked after finishing painting.

  This means that today we can use portable equipment to help cure new coatings, allowing floor refurbishment to be performed directly on site. Such materials are completely safe for indoor use. In addition, it can be used in the protection of electronic components in addition to wooden boards. Unlike this, the application of purple light curing technology is a bit complicated, and sensitive components must adopt durable and effective electrical insulation, moisture resistance, chemical resistance and weather resistance. Sexual protection measures. Therefore, it is important to ensure the complete curing of the coatings used for transistors and other electronic components. Since the light from the UV lamp cannot reach the entire coating surface, conventional UV curing technology is limited here. Full curing can be achieved by using dual curing technology. The process is divided into two curing stages, that is, in addition to UV curing, it also includes a crosslinking process that does not require UV curing.

  Among the two examples exemplified, the new UV curing process is widely used. Compared with the traditional process in the past, it is more environmentally friendly and energy saving. It not only actively calls for the current technological development, but also reduces costs and brings For a good economic benefit. In the future development, UV curing will more fully enter people's lives and bring a better life.